oki Printers Printer Inkjet Refill Instructions Gamma INKJET Australia
oki Printers Printer Inkjet Refill Instructions Gamma INKJET AustraliaHow
to use New Zap-itBefore
refilling all Epson chipped cartridges:1) Hold the Zap-It, so that the two (green & red) lights are facing
upwards.
2) Turn the cartridge upside down so that the outlet holes are also
facing upwards.
3) Locate the cartridge into the appropriate slots of the Zap-It. This
should locate the prongs from the Zap-It against the chip. (You will
need to use the L shape lug, which detaches from the Zap-It for the
C70, C80, C82 & 5200).4)
Push the cartridge and the Zap-It together. 5)
Both lights will flash once simultaneously, then the green light will
flash five times to show that chip is reprogrammed. 6)
If the red light flashes it may mean either, the prongs are not in line
with the chip, or the cartridge you are reprogramming is not an original
Epson or a JR Inkjet Compatible. 7)
You may now proceed with refilling your cartridge as per instructions
in your refill kit. Please note that we can only warrant the suitability of the Zap-It resetter
when used to reprogramme original Epson cartridges or JR Inkjet Compatible
Cartridges.
